PH(1L) PH(1L) NAME ph - CCSO Nameserver client (on-line phone book) SYNOPSIS ph [ -s server ] [ -p port ] [ -t type ] [ -f field1,field2,... ] [ -mMrRqbBTlLF ] query ph [ -s server ] [ -p port ] [ -t type ] [ -f field1,field2,... ] [ -h topic ] [ -mMnNrRqbBTlLFcC DESCRIPTION Ph queries the CCSO Nameserver, a database of University faculty, staff, and students. The database contains nearly all the information in the Student/Staff Directory (the Uni- versity phone book), as well as other information, including electronic mail addresses. Ph may be used in two ways; interactively or with command- line arguments. If given arguments, ph will treat the arguments as a query and return the results of the query. For example, ph paul pomes would return the entry for the maintainer of ph , Paul Pomes. For more information on what types of queries you may make, see the QUERIES section below. If given no arguments, ph will enter interactive mode, print a prompt, and wait for commands. Interactive mode will be discussed in detail below. Ph is not intended for the generation of mailing lists. Therefore, it will refuse any requests resulting in more than a small number of matches. This is not negotiable. OPTIONS Ph recognizes the following options. They may be specified in the PH environment variable, given on the command line, or set with the switch command from inside ph. Options given with the switch command override all others; options given on the command line override those in the PH environ- ment variable. -n Do not read the .netrc file. This option has meaning only when using ph in interactive mode (see below for descriptions of the .netrc file and interactive mode). -N Do read the .netrc file. This is the default. -r Do not reformat alias and email fields to show alias- based e-mail addresses. -R Reformat alias and email fields to show alias-based e- mail addresses. This is the default. -b Do not beautify query responses; print them in gory detail, complete with response codes. -B Beautify query responses. This is the default. -q Suppress prompts and greeting messages. When combined with -b, the output mimics that of qi(8) and is easily parsed by other programs. -m Do not use a paging program (like more(1)) when print- ing responses. -M Use a paging program. This is the default. -l Do not label field values with field names when print- ing queries. -L Label field values with field names when printing queries. This is the default. -t type Use type as a default type on queries. This is just like adding type=type to all queries. The -t option can be overriden by specifying an explicit type in the query, as in, "ph pomes type=phone". -T Do not specify any type by default; this is the default. -s server Use server as a Nameserver host, instead of the default host. A list of suitable servers may be found with the query "ph alias=ns-servers". -p port Connect to the tcp port port, instead of the default port. -c Do not wait for confirmation of edit commands. This is the default. -C Wait for confirmation of edit commands (see edit below). -f field1,field2,... Return fields field1,field2,... instead of the default list of fields, if no return clause is specified on queries. This is just like adding "return field1 field2 ..." to all queries. -F Return default list of fields; this is the default. -h topic Display a list of on-line help topics. If the -h option is followed by the name of one of the on-line help topics, the help screen for topic will be dis- played. QUERIES The Nameserver's database contains over 70,000 entries. Each entry is comprised of multiple fields, each containing information about the entry. Each field has a name that is descriptive of what the field contains; for example, the field named address contains the office mail address of the person in question (for more information on fields, see the description of the fields command in the INTERACTIVE section below). By default, queries are assumed to refer to the name or nickname field of the entry. Therefore, saying "ph john doe" looks for entries whose name or nickname field contains "john" and "doe". Fields other than the name and nickname fields must be specified; for example, ph pomes address=DCL would return entries with name or nickname "pomes" whose address contained "DCL." Matching in ph is done on a word-by-word basis. That is, both the query and the entry are broken up into words, and the individual words are compared. Although ph is insensi- tive to case, it otherwise requires words to match exactly, with no characters left over; "john" does not match "john- son", for example. This behavior may be overriden by the use of normal shell metacharacters ("?" to match any single character, "*" to match zero or more characters, and "[]" to match a single character from a set of characters). Ph will display only entries that match all of the specifi- cations in the query. For example, ph paul pomes will return all entries with both "paul" and "pomes" in the name or nickname fields. Ph returns a certain set of fields by default. It is possi- ble to ask for different fields in a query. This is done by specifying the return keyword and listing the fields of interest. For example, ph paul pomes return email would print only the electronic mail address of the main- tainer of ph. You may also ask for all fields in the entry by using "all" as a field name. This will show you every field you are allowed to see in the entry. All output from ph is sent through more(1) (or whatever pro- gram is specified in the PAGER environment variable). INTERACTIVE MODE If ph is given no arguments, it enters interactive mode, where it prompts for, executes, and displays the results of Nameserver commands. Interactive mode provides access to more Nameserver features than mere queries. Some of these features require the user to identify him/her self to ph by use of the login command; others do not. Commands may be abbreviated, provided enough characters are given to distin- guish them from other commands. .netrc file Ph reads the same .netrc file as does ftp (see ftp(1)). If it finds a machine named "ph" that has a login and a password specified for it, ph will automatically do a login command, using the values from the .netrc file. Ph will silently refuse to use a .netrc file that has any permissions for group or other (see chmod(1)). Public Commands The following commands do not require the user to be logged in to the Nameserver: help [topic] Provides explanations of Nameserver commands. Given no arguments, help lists the available help topics. Given a topic as an argument, help will print help for that topic. A list of commands and a one-line description of each command may be obtained by requesting the topic commands. query Performs Nameserver queries exactly like non- interactive ph queries except that metacharacters do not have to be quoted. fields Lists the fields currently in use in the Name- server. For each field, a display like the fol- lowing (admittedly ugly) is produced: -200:2:email:max 64 Lookup Public Default Change -200:2:email:Preferred electronic mail address. ... The leading number is a reply code from the Name- server. The next number is the field number. Following the field number is the name of the field, the maximum length of the field, and the attributes for the field. The second line has, in addition to repeated reply code, number, and name, a one-line description of the field. The attributes determine how a field may be used. Lookup means the field may be searched in a query. Indexed means the field is indexed (at least one Indexed field must be included in every query). Default means the field is displayed by default. Change means that users may change the field. set option[=value] Allows Nameserver options to be set. These options are for future use. switch -option [value] Allows ph options to be set. See the OPTIONS sec- tion above. quit Exits ph. login alias [password] Identifies the user to the Nameserver. Alias is your Nameserver alias, a unique name for you in the Nameserver; it is printed in ph queries, as the first thing after "email to:": email to: p-pomes@uiuc.edu (p- pomes@mirage.cso.uiuc.edu) In this case, the alias is "p-pomes". [password] is your password. The square brackets are not actually typed; instead they indicate that the password MAY optionally be entered here. If it is not supplied, ph will prompt for it if nec- essary. You will be prompted for your Nameserver password when you give the login command, unless you are using ph from the login in your email field (the one in parentheses on the "email to:" line), and your system administrator has made ph "setuid root", in which case no password will be required. Your Nameserver password is not the same as your system password; the only way to discover your Nameserver password is to bring yourself and a University ID to the CCSO Accounting Office in 1420 DCL. Because of abuses in the past, pass- words cannot be given out via email, phone, or to third parties. Commands Requiring Login The following commands require that the user executing them be logged in to the Nameserver. passwd [alias] Changes your Nameserver password. You will be asked to type your new password twice. Ph will complain if your password is too short or contains only numbers (although it does allow such pass- words). Privileged users may change the passwords of certain other users by specifying the alias of the other user when giving the passwd command. me Lists the Nameserver entry of the currently logged-in user. edit field [alias] Allows ph users to change those fields in their entry that have the Change attribute set. Edit will retrieve the value of the named field (if a value exists), and will allow the user to edit the value with vi(1) (the EDITOR environment variable may be used to override the use of vi). The changed value will then be reinserted in the Name- server. If the -C option is in effect, the mes- sage, "Change the value [y]?" will be printed after the editing is finished. Pressing return alone, or anything beginning with "y", will make ph change the value; anything beginning with "n" will make ph discard the changes. make field=value [field2=value2...] Allows ph users to change those fields in their entry that have the Change attribute set. Make will set the specified field(s) to the specified value(s) in the entry of the currently logged in user. add Adds entries to the Nameserver. This is a privi- leged command. delete Deletes entries from the Nameserver. This is a privileged command. logout Undoes the effects of a login command. QUERY EXAMPLES Here are some examples to clarify ph queries. Each example is preceded by a description of the desired effect. It is assumed that the queries are being done with ph from the command line, rather than by using the interactive mode of ph. The only difference for interactive mode is that metacharacters would not have to be quoted or escaped. Find the ph entry for Paul Pomes: ph paul pomes Find the ph entry for P. Pomes, where the rest of the first name is not known: ph p\* pomes Find Alonzo Johnson (or is that JohnsEn?): ph alonzo johns\?n or ph alonzo johns\[eo\]n Find Paul P., where the rest of the last name is unknown: ph paul p\* The last query fails because it matches too many entries. It is therefore necessary to narrow the search. Suppose it is known that Paul P. has an office in DCL: ph paul p\* address=DCL Alternately, suppose Paul P. works for CCSO. You might try: ph paul p\* department=CCSO When that failed, a good next guess would be: ph paul p\* department=computing The moral of the story is that fields in ph generally con- tain whatever the user wishes them to contain, and, hence, there may be many different spellings and abbreviations for any particular field (some fields are exceptions, including the name field, which is always the full name, as known to the University, of the person involved). It pays to make liberal use of metacharacters and creativity when searching fields other than name. Suppose all that is wanted is the full name and electronic mail address of P. Pomes: ph p\* pomes return name email RENAMING PH If ph is invoked with a name other than ph, slightly differ- ent option processing is done. For the sake of an example, let us assume ph was invoked with the name, "unit". The following consequences obtain: Ph will assume an option of "-t unit". Ph will read the UNIT environment variable, after reading the PH environment variable, and before reading command-line options. This feature allows the easy installation of entry-type spe- cific lookup commands, as well as custom configuration of those commands. BUGS Separate words in a query are allowed to match the same word in the entry; "ph s\* smith" is functionally equivalent to "ph smith", because the "s*" is allowed to match "smith". Ph does some looking about in the commands you give it, but does not understand the full syntax of Nameserver commands. This can occasionally lead to mistakes, especially when dealing with quoted strings. DISTRIBUTION Source code for ph is available by anonymous ftp to vixen.cso.uiuc.edu, in the file pub/ph.tar.gz. The complete system, including source for the qi(8) server side is in the file pub/qi.tar.gz. This source works on 4.[23]BSD UNIX systems. Any troubles encountered porting ph to a particu- lar system are of interest to the maintainer of ph, as are ports done to other operating systems. SEE ALSO The CCSO Nameserver - An Introduction, by Steven Dorner; updated by Paul Pomes. The CCSO Nameserver - Server-Client Protocol, by Steven Dorner; updated by Paul Pomes. qi(8) AUTHOR Steve Dorner (sdorner@qualcomm.com), Qualcomm, Inc. (for- merly at the University of Illinois Computing and Communica- tions Services Office) The code is now maintained by Paul Pomes (p-pomes@uiuc.edu), University of Illinois Computing and Communications Services Office. 30-Jul-1992 PH(1L)